越卓激光刻字机
Yue Zhuo Laser Plotter
越卓首创自动智能控光系统,完全取缔普通激光刻字机手动调节激光大小的传统模式,越卓彻底为你解决直线、曲线切割不均匀、拐角激光过强造成的效果差、效率低、大幅面切割人工二次加工浪费工时等弊端。彻底为你解决传统刻板工艺方式的同时,为你提供方便、省时、省力和高速度、高精度的全新体验,980S、1390S、1750S、和980SA(自动巡边异形切割)、1390SA(自动巡边异形切割)可满足不同行业对尺寸和功能的需求,拥有完全自主设计极其完善的连筋字库,更多连筋字库每月不断更新中...我们的客户永久免费升级!
适用材质:
Application materials:
双层材质:即时贴、普通反光膜、高强度反光膜、车贴、服装转印贴及锦旗发泡贴等。
Double-deck materials: sticky notes, ordinary reflecting films, high-strength reflecting films, car stickers, clothing transfer stickers and silk banner foaming stickers, etc.
单层材质:胶片、绝缘纸、牛皮纸、白卡、ABS板(≦0.5)、PVC(≦0.8mm)双色板(低速)等大部分非金属软性材料。
Single-deck materials: films, insulation papers, kraft papers, white cards, ABS boards (≦0.5), PVC (≦0.8mm), two-tone boards (low speed) and other most nonmetal soft materials.
性能特点:
Performance features:
1. 采用先进的ARM STM32位处理器,高可靠和抗干扰性结构设计;高性能、低功耗、超低发热量、超静音的DRV8818驱动芯片,满足高速运动需求;
1. Adopt advanced ARM STM32 bit processor, high-reliable and anti-interference design and high-performance, low-power consumption and ultra-silent DRV8818 driver chips with ultralow calorific values, and meet with the requirements of high-speed motions.
2. SA款机器采用高精度全自动识别感应头,真正实现自动巡边,强大的软件自动扫描功能,导入图片即可自动生成切割轮廓,节省排版时间,连接电脑无需安装驱动,插入USB即自动检测识别端口,使用简单,方便稳定快捷;
2. SA machines adopt high-precision and fully automatic recognition inductive heads, which genuinely achieves automatic tracing-edge, and strong automatic software scanning. When you import pictures, cutting outlines will be automatically generated, so that the type-setting time is saved. When they connect with computers, no driver installations are required. It is easy, convenient, stable and speedy that you insert USB to automatically detect recognition ports.
3.真正的USB2.0和RS232串口通讯接口,克服了传统低刻字机传输速度慢、
串口和假SUB口通讯不稳定等缺陷;
3. Real serial communication interfaces of USB2.0 and RS232 overcome such defects as slow transmission speed and instable communications of serial ports and false SUB of traditional cutting plotters.
4.固件可通过网络实现远程升级;
4. The firmware can be remotely upgraded through network.
5.适用Windows7/Windows8/Windows10操作系统;
支持所有带打印功能操作软件的直接输出。
5. Apply to operating systems of Windows7/Windows8/Windows10; support direct output of all operating software with print functions.
名称 Name |
内容 Contents |
电源 Power source |
220V/110V±10% 50HZ |
激光功率 Laser power |
50W(选配80W) 50W (optional 80W) |
总功率 Total power |
100-150W |
材料宽度 Width of materials |
980 980mm 1390 1390mm 1750 1750mm |
雕刻速度 Engraving speed |
10mm/s﹣800mm/s |
电流 Electricity |
0-30mA |
接口类型 Interface types |
串口/USB口/U盘脱机 Serial port/USB/U-DISK |
工作温度 Operating temperature |
1℃~35℃ |
工作湿度 Operating humidity |
1%-80% |